Fig 635 Designed for fast opening, self-closing service in the control of steam, gas or liquids at pressures to 200 pounds. Figure 635 is designed for hand, cord, or chain operation. Lever is reversible and adjustable. Seats and Discs May be reground without removing valve from line. Integral seats. Bodies Precise alignment of working parts […]

Fig 1240 Designed for fast opening, self-closing service in the control of steam, gas or liquids at pressures to 200 pounds. Figure 1240 is designed for hand gripping and intended for air service. Seats and Discs May be reground without removing valve from line. Integral seats. Bodies Precise alignment of working parts assures tight closure […]

Fig 73-PS For maximum versatility in all types of general services, all parts of these “Renewo” valves are renewable. Seats and discs are interchangeable, made of tough materials, and can be reground without removing them from the line. Seats and Discs Interchangeable and regrindable. 500 Brinell stainless steel plug seats and discs. For throttling, drain, […]

Fig LQ600-200 Designed to practically eliminate maintenance in average industrial use. Ideal for high pressure use in extremely severe services. Discs and seats are made of exceptionally wear-resistant nickel alloy. Seats and Discs Brinalloy. Flat, lapped metal-to-metal seat design provides a leakproof seal and excellent throttling service. Because they need no replacement or regrinding, seats […]

Fig 407 Regrinding valves were first designed by Lunkenheimer; they are made so all parts can be renewed, and if the seating surfaces or discs become worn, they may be reground to theirs original tightness without removing them from the line. Bodies Ample, with full flow areas and regrindable, integral seating surfaces. Bonnets Union design […]

Fig 214 Non-metallic disc valves are used in industry where a tight seat is required with minimum effort. Discs are quick and inexpensive to renew. Trim is interchangeable on screw and solder end bodies. Discs Non-metallic resilient Teflon disc aid in tight seating. Renewable so worn discs can easily be replaced. Disc holder slips on […]

Fig 123 Non-metallic disc valves are used in industry where a tight seat is required with minimum effort. Discs are quick and inexpensive to renew. Trim is interchangeable on screw and solder end bodies. Discs Non-metallic resilient Teflon disc aid in tight seating. Renewable so worn discs can easily be replaced. Disc holder slips on […]

Fig 2141 Class 125 Bronze Globe and Angle Valves are ruggedly designed and proportioned for multi-purpose use. These valves feature a tapered disc/seat closure with a large seating area. Bodies Large and heavy for maximum strength. Pipe threads are long and clean cut to prevent distortion of diaphragm by pipe ends. Bonnets Wide wrench flats […]

Fig 2140 Class 125 Bronze Globe and Angle Valves are ruggedly designed and proportioned for multi-purpose use. These valves feature a tapered disc/seat closure with a large seating area. Bodies Large and heavy for maximum strength. Pipe threads are long and clean cut to prevent distortion of diaphragm by pipe ends. Bonnets Wide wrench flats […]